Honda BF250A - Cruising

51
OPERATION
To shift gears, move the control lever
to select the F (forward), N (neutral),
or R (reverse) gear.
The control lever cannot be moved
from the N (neutral) position unless
the neutral release lever is squeezed
(side-mount/panel-mount types).
Moving the control lever beyond the
gear selection range increases engine
speed.
Side-Mount Type Top-Mount Type
Adjust the control lever friction
adjuster so the control lever will hold
a constant throttle setting while
cruising.
TO INCREASE
FRICTION
TO DECREASE
FRICTION
CONTROL LEVER
FRICTION ADJUSTER
Panel-Mount Type
CONTROL LEVER
FRICTION ADJUSTER
TO DECREASE
FRICTION
TO INCREASE
FRICTION
TO INCREASE
FRICTION
TO DECREASE
FRICTION
CONTROL LEVER
FRICTION ADJUSTER
31ZX26040.book Page 51 Friday, July 25, 2014 5:14 PM