EasyManua.ls Logo

Honda BF250A - Page 90

Honda BF250A
139 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
88
STORAGE
2. Add Honda Marine fuel stabilizer
following the instructions on the
label.
3. After adding a fuel stabilizer, run
the engine in water for 10 minutes
to be sure that the treated gasoline
has replaced the untreated gasoline
in the vapor separator.
4. Turn the engine OFF.
Draining the Fuel System
You can avoid fuel deterioration
problems by draining the fuel tank
and vapor separator.
Drain the fuel into an approved fuel
container.
1. Unhook the drain hose from the
clip on the lower left of the head
cover.
2. Set the end of the hose toward the
outside of the engine undercase and
below the level of the vapor
separator drain screw.
VA P O R
SEPARATOR
DRAIN
HOSE
CLIP
DRAIN SCREW
31ZX26040.book Page 88 Friday, July 25, 2014 5:14 PM

Table of Contents

Related product manuals