Taking Care of the Unexpected
219
If a Fuse Blows
Main Fuses Access
1.
To prevent an accidental short circuit, turn the ignition switch to
OFF (w) before checking or replacing the fuses.
2.
Remove the seat (page 120).
3.
Remove the rear fender cover (page 121).
4.
To access the main fuse 1 (2), remove the fuse cover (3).
5.
To access the main fuse 2 (4), remove the fuse box cover (5).
6.
Pull the main fuses out.
If the main fuse 1 is blown, see your dealer for this service.
If the main fuse 2 is blown, install the spare fuse (6).
7.
Install the fuse cover.
(2) main fuse 1 (5) fuse box cover
(4)
(2)
(6) spare fuse
UNDER REAR FENDER COVER
(3)
(3) fuse cover
(4) main fuse 2
(6)
(5)
19 TRX500FM1 FM2 (U)-32HR4A40.backup.book Page 219 Wednesday, April 18, 2018 3:36 PM
To Next Page
Loading...
