Basic Operation & Riding
78
Starting & Stopping the Engine
1.
Before starting, make sure the vehicle is on a level surface and
lock the parking brake (page 45).
2.
Turn the ignition switch (1) to ON (q).
Confirm the following:
• The transmission is in neutral, the neutral indicator (2) is ON and
the gear position indicator shows “N”.
• The engine stop switch (3) is set to RUN (e).
Preparation
(1)
(2)
(3)
(1) ignition switch (2) neutral indicator
(3) engine stop switch
19 TRX500FM1 FM2 (U)-32HR4A40.backup.book Page 78 Wednesday, April 18, 2018 3:36 PM
To Next Page
Loading...
