28
MAN0530 Issue 15 - 07/17 Searchline Excel
2104M0506
3.5 UNPACKING
(1) Carefully unpack the equipment, observing any instructions that may be printed on or
contained within the packaging.
(2) Checkthecontentsfordamageandagainstthepackingnotefordeciencies.
In the event of damage or loss in transit, notify the carrier and Honeywell Analytics or
your local agent immediately.
The gas detector consists of the following items:
Where alternative component sizes are given the size depends on the version of unit,
i.e.mid/long range version or short range version.
1 x Receiver Unit 1 x Transmitter Unit
2 x Mounting Plates 2 x Mounting Brackets
(with grub screws)
2 x Pivot Blocks 4 x Adjustment Clamps
(with grub screws) (with grub screws)
NOTE: REFER TO APPENDIX 4 FOR COMPONENT IDENTIFICAITON AND FOR SPECIAL
INSTRUCTIONS ON INSTALLATION, ALIGNMENT AND COMISSIONING OF THE
MARITIME BRACKET.
3. INSTALLATION AND OPERATION
To Next Page
Loading...
