Honeywell 04230-A-1001 - Page 72

72
MAN0530 Issue 15 - 07/17 Searchline Excel
2104M0506
7. CERTIFICATION
7.2.3 Conduit Technical Characteristics
Ingress Protection IP66 and 67.
TemperatureRating  -40to+105
o
C.
Construction A helically wound galvanised steel core with cotton packing
and enhanced oil resistant PVC covering. Covering material
displays good resistance to dilute acids, alkalis and
hydrocarbon products.
Colour Grey
Electrical Flash Voltage More than 24kV.
Insulation Resistance More than 100M ohms.
ConnectorPulloffClassication FRG04:Heavy.
ConductorCrushClassication FRG04:Heavy.
Flame Propagation Flame dies in less than 30 seconds after ignition source is
removed.
Approvals Bureau Veritas.
7.2.4 CerticationLabelsforallReceivers
Product name
and part number
Indicates type of
receiver (e.g. Rx
short shown here)
Explosion protection
mark and equipment
group and category
Certied ambient
temperature
Modication status
Warning
Certication code as
IEC / EN60079-0:
IEC / EN60079-1: and IEC / EN 60079 - 28
Certication
numbers
Serial number
Identication
number of ATEX
notied body
CE mark
Conforms to all
applicable
European directives