6 - 11
MAN0443.P65 Issue 13 Aug 04 5701 Control System
05701-M-5001 A02279
CHAPTER 6 - OPERATING INSTRUCTIONS
To output a summary of the whole rack, proceed as follows:
(1) Plug a RS232 printer into the Engineering Card serial port.
(2) Push the up ( ) and down ( ) buttons simultaneously without any
channel card being selected and the following data will be printed:
21/07/97 11:05 ** Rack info. **
Card type : Engineering card
S/W : v02.10
Eng key override : in-active
Customer name :
DMT
Customer site :
Essen
Serial No : 22411A17
Slot : 01
Card type : 5701
S/W : v02.40
Serial number : 22411C01
Tag : Vent 23C
Gas : Methane
Range : 0 - 100
Active alarms : FT
--
Slot : 02
Type : 5701
S/W : v00.75
Serial No : 22411C02
Tag : 23C-03
Gas : Methane
Range : 0 - 100
Active alarms : A1
--
Slot : 12
Type : 5701
S/W : v00.75
Serial No : 22411C02
Tag : Unknown
Gas : Unknown
Range : 0 - 100
Active alarms : None
Note: The information printed will vary slightly depending on the type of
sensor drive module fitted to the channel card.
To Next Page
Loading...
