DESIGN SPECIFICATIONS
7120
Operational
Light Source: Visible Laser Diode (VLD) @ 650 nm
Laser Power: Less than 1 mW average
Embedded Laser:
Max Optical Power: 10 mW
Wavelength: 650 nm
Normal Depth of Field: 0 mm – 215 mm
0.33 mm (13 mil) bar code
Reduced Depth of Field: 0 mm – 190 mm
Scan Speed: 1120 scan lines per second
No. of Scan Lines: 20
Motor Speed: 3360 RPM
Min Bar Width: 0.13 mm (5.0 mil)
Decode Capability:
All standard 1-D bar codes including GS1 DataBar,
GS1 DataBar - Expanded, and GS1 DataBar Limited
System Interfaces:
RS232, Keyboard Wedge, Stand-Alone Keyboard, Light Pen
Emulation, RS485, USB (full speed)
Print Contrast: 35% minimum reflectance difference
No. Characters Read:
Up to 80 data characters
Maximum number will vary based on symbology and density.
Beeper Operation: 7 tones or no beep
Indicators (LED):
Blue = laser on, ready to scan
White = good read, decoding
Mechanical
Width: Base - 102 mm (4.0") Orb - 80 mm (3.1")
Depth : 105 mm (4.1")
Height: 150 mm (5.9")
Weight: 14.5 oz (410 g)
Orb Tilt: 30° Vertical
Specifications subject to change without notice.
22
To Next Page
Loading...
