Honeywell BENDIX/KING RDR 2000 User Manual

BENDIX/KING RDR 2000
Rev 7, July/2002 00643I05.TDC Page 2-25
2. Check that the tilt table is set for 0
°
roll.
3. Adjust the TILT SETTING between 5° and 10° UP to increment the ROLL ANGLE
field to 0.0 ± 1.0
°
(adjusting the TILT SETTING between 5° and 10° DOWN will dec-
rement the numbers). Upon reaching 0
°
± 1.0
°
, quickly adjust the TILT SETTING
to above 10° to lock in the setting. See figure 2-11.
4. Set the tilt table to 10° roll right. The value should be 10.0R ± 1.0
°
.
5. Set the tilt table to 10° roll left. The value should be 10.0L ± 1.0
°
.
6. Set the tilt table to 0
°
roll. The value should be 0.0 ± 1.0
°
.
7. Proceed to Step I.
I. PITCH GAIN
1. Set the tilt table for 5° PITCH UP.
2. Adjust the GAIN knob for a GAIN POT setting between -24.5 and -26.5 (see figure
2-10). An 02 should be displayed in the AZIMUTH COUNT field (see table 2-2).
3. Adjust the TILT SETTING between 5° and 10° UP to increment the PITCH ANGLE
field to 5.0 ± 1.0
°
(adjusting the TILT SETTING between 5° and 10° DOWN will dec-
rement the numbers).
Upon reaching the desired setting, quickly adjust the TILT SETTING to above 10
to lock in the setting. See figure 2-11.
4. Set for 5
°
PITCH DOWN. Repeat steps 2 and 3.
5. Set the tilt table to 0
°
pitch and roll.
6. Proceed to Step J.
J. ROLL GAIN
1. In determining the tilt for the table use the standard rate turn for the aircraft being
aligned.
2. Adjust the GAIN knob for a GAIN POT setting between -21.0 and -23.0 (see figure
2-10). An 03 should be displayed in the AZIMUTH COUNT field (see table 2-2).
3. Adjust the TILT SETTING between 5° and 10° UP to increment the ROLL ANGLE
field to Standard Rate Turn (SRT) for the aircraft (adjusting the TILT SETTING be-
tween 5° and 10° DOWN will decrement the numbers). Upon reaching the desired
setting, quickly adjust the TILT SETTING to above 10° to lock in the setting. See
figure 2-11.
4. Set the tilt table for SRT roll left. Repeat Steps 2 and 3 of this section.
5. Set the tilt table to 0
°
pitch and roll.
6. Proceed to Step M.

Honeywell BENDIX/KING RDR 2000 Specifications

General

Brand	Honeywell
Model	BENDIX/KING RDR 2000
Category	Radar
Language	English