CIPer
TM
MODEL 30 CONTROLLER - INSTALLATION AND OPERATIONS GUIDE
Steps To Run Distribution File Installer
1. Connect to the platform and click Distribution File Installer.
• For upgrading only controller tool use honeywell-IPCtool-4.10.0.1.1.257.dist file for
installation.
• For upgrading controller baseboard firmware use honeywell-IPCBASE.dist-
1.1.1.146.dist file for installation.
• For upgrading large expansion IO firmware, use honeywell-IPCIO-1.1.0.140.dist file
for installation.
• For upgrading small expansion IO firmware, use honeywell-IPCIO-1.1.0.76.dist file
for installation.
To Next Page
Loading...
