Need help?Do you have a question about the Honeywell C300 and is the answer not in the manual?
General| Memory | 512 MB RAM, 512 MB Flash |
|---|---|
| Type | Process Controller |
| Communication Ports | Ethernet, Serial |
| Power Supply | 24V DC |
| Inputs | Analog and Digital |
| Outputs | Analog and Digital |
| Communication | Ethernet, Serial, HART |
| Redundancy | Supported (Hot Standby) |
Details the C300 Controller, its exceptions, redundancy, and block structure.
Provides step-by-step instructions for assembling and installing the C300 Controller.
Details the process for installing a secondary controller for redundancy.
Explains the process and behavior for upgrading C300 Controller firmware.
Guides the creation of C300 Controller and Control Execution Environment blocks.
Provides detailed steps for configuring the CEEC300 function block parameters.
Details the configuration of a secondary controller block for redundant systems.
Explains the procedure to convert a single controller to a redundant pair.
Outlines the steps to revert a redundant controller setup to non-redundant.
Guides the configuration of IOLINK blocks for controller interface to I/O modules.
Guides the procedure for loading C300 Controller and associated blocks.
Describes the automatic tasks executed by the controller upon power application.
Explains the meaning of LEDs and the alphanumeric display on the C300 faceplate.
Guides the process of activating the CEEC300 block for control strategy execution.
Provides steps to initiate a shutdown command for the C300 Controller.
Details how to manually initiate a synchronization command for redundant controllers.
Guides disabling synchronization between redundant controllers.
Details how the controller handles processing overload conditions and recovery.
Describes the states related to controller synchronization.
Details parameters related to controller redundancy configuration and status.
Describes the switchover process and related commands.
Provides procedures for replacing C300 Controller modules and IOTA boards.
Identifies common problems and provides solutions for fixing them.
Helps determine causes of abnormal startup conditions related to communication.
To Next Page