Honeywell C300 User Manual

10. C300 Controller Troubleshooting
10.12. Getting further assistance
270
Series 8 C300 Controller User's Guide
Honeywell
R500
April 2017
10.12 Getting further assistance
Other troubleshooting sources
The following table lists other documents and sections that contain troubleshooting
information for other Experion LX subsystems.
Document/Section
Comments
Control Builder Error Codes Reference
Describes error codes generated from within
Control Builder.
Guidelines for requesting support
If you cannot resolve a problem by using the above mentioned guides, you can request
support from your TAC. When requesting support, supply as many relevant details about
the problem by referring to Gathering information for reporting problems to Honeywell
section to obtain the problem-related information.

Honeywell C300 Specifications

General

Memory	512 MB RAM, 512 MB Flash
Type	Process Controller
Communication Ports	Ethernet, Serial
Power Supply	24V DC
Inputs	Analog and Digital
Outputs	Analog and Digital
Communication	Ethernet, Serial, HART
Redundancy	Supported (Hot Standby)