Honeywell C300 - UTP;TCP Tab

5. C300 Configuration Form Reference
5.1. C300 Controller Block
104
Series 8 C300 Controller User's Guide
Honeywell
R500
April 2017
Plain Text
Parameter Name
User
Configurable
Notes
Crossover Cable
Failed
XOVERFAILED
No
Status indicator for
Crossover cable -
indicates that the top-level
FTE switch crossover
cable (Inter-LAN link) has
failed.
UTP/TCP tab
The UDP/TCP tab displays statistics related to open UDP and TCP connections
associated with this C300 Controller. These parameters provided here are used for
maintenance and performance monitoring purposes. The following table summarizes the
parameter data you can monitor on the UDP/TCP tab of the configuration form for the
selected C300 block.
Plain Text
Parameter Name
User
Configurable
Notes
UDP/TCP
Local UDP Listeners
(not used in this
release)
UDPLISTENERS
No
Shows path information for
all open ports on the FTE
Bridge module.
Current TCP
Connections
(not used in this
release)
TCPCONNTABLE
No
Shows path information for
all currently connected
clients of the FTE Bridge
module.
UDP Statistics -
(Provides unreliable connectionless packet delivery service between clients.)
Datagrams Delivered
UDPINDGRAMS
No
Total number of User
Datagram Protocol (UDP)
datagrams delivered to
destination protocol ports.
Datagrams for
Unknown Ports
UDPNOPORTS
No
Total number of received
UDP datagrams for which
there was no application at
the destination port.