Honeywell C300 - 4.12 Copy Control Modules

78
Series 8 C300 Controller User's Guide
Honeywell
R500
April 2017
4. C300 Controller Configuration
4.12. Copy Control Modules
Step
Action
Result
10
Click Close.
The dialog box closes and assigned
components now appear in CEE folder in
Project tab.
4.12 Copy Control Modules
Prerequisites
 Control Builder is running
 Tree windows are open
Considerations
All illustrations used in the procedure are for example purposes only.
To copy an existing Control Module, perform the following steps.
Step
Action
Result
1
From the Project Tree, select the
desired Control Module block to be
copied.
Selected Control Module block is
highlighted on the Project Tree.
2
Click Edit > Copy.
Alternate method:
Click <Ctrl>-C.
Selected Control Module block is
saved to Control Builder clipboard
and Name New Function Block(s)…
dialog appears.