Honeywell C300 User Manual

5. C300 Configuration Form Reference
5.4. IOLINK Block
R500
April 2017
Series 8 C300 Controller User's Guide
Honeywell
157
Server Displays tab
The Server Displays tab is common to all configuration forms for tagged blocks in
Control Builder. Refer to the Server Displays tab for a table that summarizes the
parameter data you can monitor and configure on this tab of the configuration form for
the selected CEEC300 block.
Control Confirmation tab
Refer to the Control Confirmation tab for information on this tab.
Identification tab
The Identification tab is common to all configuration forms for tagged blocks in Control
Builder. Refer to the Identification tab for a table that summarizes the parameter data you
can monitor and configure on this tab of the configuration form for the selected CEEC300
block.

Honeywell C300 Specifications

General

Memory	512 MB RAM, 512 MB Flash
Type	Process Controller
Communication Ports	Ethernet, Serial
Power Supply	24V DC
Inputs	Analog and Digital
Outputs	Analog and Digital
Communication	Ethernet, Serial, HART
Redundancy	Supported (Hot Standby)