Honeywell C300 - C300 Controller Installation and Upgrades; Pre-installation Considerations

R500
April 2017
Series 8 C300 Controller User's Guide
Honeywell
31
3. C300 Controller Installation and Upgrades
This chapter describes the information about installing various Series 8 components.
Physical descriptions of the components as well as procedures for installing these
components are provided.
The following table provides the sections covered in this chapter. Click the topic to view
it.
Topic
Pre-installation considerations
Series 8 Power System
C300 Controller installation
C300 Secondary Controller Installation
Upgrading C300 Controller Firmware
3.1 Pre-installation considerations
Installation declarations
ATTENTION
This equipment shall be installed in accordance with the requirements of the
National Electrical Code (NEC), ANSI/NFPA 70, or the Canadian Electrical
Code (CEC), C22.1. It is intended to be mounted within an enclosure or
suitable environment acceptable to the local "authority having jurisdiction," as
defined in the NEC, or "authorized person" as defined in the CEC.