Need help?Do you have a question about the Honeywell CUL6438SR-CV1 and is the answer not in the manual?
General| Brand | Honeywell |
|---|---|
| Model | CUL6438SR-CV1 |
| Category | Controller |
| Language | English |
Overview of Stryker™ Lon Configurable CVAHU Controller and Zio/Zio Plus LCD Wall Modules.
Details on the CUL6438SR-CV1 controller, its features, and compatibility with Niagara Framework.
Key features of the Stryker™ Lon Configurable CVAHU Controller, including network protocol and configuration.
Description of TR70 and TR75 series Zio/Zio Plus LCD wall modules and their capabilities.
Key features of the TR70 Series wall modules, including tenant access and parameter customization.
How Stryker CVAHU systems use Zio wall modules for commercial building HVAC control.
Details on how the CVAHU controller manages heating, cooling, economizers, and system fan operations.
How the CVAHU controller manages heat pump units, compressors, and auxiliary heat.
List of products covered, including controller, wall modules, and termination module.
Overview of the manual's structure, divided into introduction and configuration sections.
List of related documents for Stryker CVAHU and Zio wall modules, including specification data and installation guides.
Names of Stryker CVAHU controllers and TR70/TR75 Zio wall module models.
Details on agency certifications and compliance for Stryker CVAHU controller and Zio wall modules.
Glossary of technical terms and acronyms used in the manual for CVAHU and Zio systems.
References to literature detailing the construction and specifications of controllers and wall modules.
Information on the compatibility of TR70 Series LCD Wall Modules with Stryker controllers.
Introduction to Contractor Mode for navigating and configuring parameters on the Zio wall module.
List of controller features that are not supported when using Zio configuration.
Details on the default configuration settings for the CVAHU controller when using Zio.
Procedure for selecting and setting the default home screen for the tenant view.
Procedure for providing tenant access to parameters via the View More screen.
Overview of sensor parameters available for configuration and monitoring in the Zio system.
Overview of status parameters for CVAHU controller, including output signals and limits.
Overview of temperature setpoint configuration parameters for CVAHU.
Overview of override parameters for CVAHU systems.
Overview of alarm parameters and status for CVAHU.
Overview of sensor calibration parameters for CVAHU.
Overview of wall module configuration parameters.
Overview of control configuration parameters for CVAHU.
Overview of universal input configuration parameters.
Overview of digital input configuration parameters.
Overview of input configuration parameters for CVAHU.
Overview of analog output range configuration parameters (AO1, AO2, AO3).
Overview of analog and digital output configuration parameters.
Overview of time and date configuration parameters.
Overview of schedule configuration parameters.
Display and configuration of Zio temperature sensor readings.
Display and configuration of Zio humidity sensor readings from the wall module.
Display and configuration of room temperature readings.
Display and configuration of room relative humidity readings.
Display and configuration of room CO2 (PPM) readings.
Display and configuration of discharge air temperature readings.
Display and configuration of outside air temperature readings.
Display and configuration of outside air humidity readings.
Display and configuration of occupancy sensor status and modes.
Display and configuration of window open/closed contact status.
Display and configuration of monitoring switch status.
Display and configuration of monitored modulation status.
Display of heating output signal status.
Display of cooling output signal status.
Display of damper (%) output signal status.
Display of demand limit setpoint shift status.
Display of effective terminal load (%) on the controller.
Display of configured free modulating (%) output signal.
Display of auxiliary economizer status as ON or OFF.
Display of configured free digital 1 command status as ON or OFF.
Display of fan digital output status as ON or OFF.
Display and modification of occupied cooling setpoint.
Display and modification of unoccupied cooling setpoint.
Display and modification of occupied heating setpoint.
Display and modification of unoccupied heating setpoint.
Display and modification of standby cooling setpoint.
Display and modification of centre setpoint read from wall module.
Display and modification of standby heating setpoint.
Display and modification of Space freeze protection setpoint.
Display of room temperature effective setpoint.
Display and modification of supply fan override command.
Display smoke detector status as TRUE, FALS or UNDEFINED.
Display cooling override status as TRUE, FALS or UNDEFINED.
Display heating override status as TRUE, FALS or UNDEFINED.
Display frost override status as TRUE, FALS or UNDEFINED.
Display fan override status as TRUE, FALS or UNDEFINED.
Display IAQ alarm override status as TRUE, FALS or UNDEFINED.
Display invalid setpoint override status as TRUE, FALS or UNDEFINED.
Display space temperature override status as TRUE, FALS or UNDEFINED.
Display and modification of Zio temperature offset.
Display and modification of Zio humidity (%) offset.
Display and modification of units for temperature parameters (C, F).
Display and modification of wall module type (NONE, TR20, ZIO).
Display and modification of centre setpoint usage (FALS, TRUE).
Display and modification of centre setpoint high limit.
Display and modification of centre setpoint low limit.
Display and modification of wall module bypass time setpoint.
Display and modification of heating setpoint high limit.
Display and modification of cooling setpoint high limit.
Display and modification of heating setpoint low limit.
Display and modification of cooling setpoint low limit.
Display effective heating high setpoint.
Display effective cooling high setpoint.
Display effective heating low setpoint.
Display effective cooling low setpoint.
Display and modification of heat pump type selection (CON, GSHP, ASHP).
Display and modification of space cooling PID control throttling range.
Display and modification of number of cooling/heat pump stages.
Display and modification of cooling PID control integral time.
Display and modification of heating output type for auxiliary heat.
Display and modification of space heating PID control throttling range.
Display and modification of heating PID control integral time.
Display and modification of fan mode for CVAHU.
Display and modification of occupancy sensor operation status.
Display and modification of input type for universal input 1.
Display and modification of input type for digital input 1.
Display and modification of logical input config for space temperature.
Display and modification of logical input config for space relative humidity.
Display and modification of logical input config for space CO2.
Display and modification of logical input config for discharge air temperature.
Display and modification of logical input config for mixed air temperature.
Display and modification of logical input config for outside air temperature.
Display and modification of logical input config for occupancy sensor.
Display and modification of logical input config for window contacts.
Display and modification of analog output 1 range.
Display and modification of analog output 2 range.
Display and modification of analog output 3 range.
Display and modification of logical output config for Cooling/Heat Pump stage 1.
Display and modification of logical output config for Cooling/Heat Pump stage 2.
Display and modification of logical output config for Cooling/Heat Pump stage 3.
Display and modification of Heat Pump change over relay command.
Display and modification of logical output config for Heating stage 1.
Display and modification of logical output config for Heating stage 2.
Display and modification of logical output config for Heating stage 3.
Display and modification of logical output config for Fan Start-Stop Command.
Display and modification of logical output config for Damper control signal.
Displays current controller time in HH MM format.
Display and modification of time in hours.
Display and modification of time in minutes.
Display and modification of date in years.
Display and modification of date in months.
Display and modification of date in days.
Procedure to access the schedule parameter group.
Steps for viewing and editing the schedule for Monday events.
Procedure for changing time and occupancy state for schedule events.
Features tenants can change, like Setpoints, Fan speed, System mode, and Override.
Description of the default Tenant mode home screen and its soft key options.
Description of AUTO fan mode operation.
Description of manual ON fan mode operation.
Description of manual OFF fan mode operation.
How tenants can override occupancy settings for a specified duration.
Procedure for canceling an active tenant override.
How to change system state (Off, Auto, Cool, Heat) and view parameters.
How tenants can adjust parameter values if enabled by the contractor.
Displays room temperature and its input to the Sbus wall module.
Displays room humidity and its input to the Sbus wall module.
Displays outside air temperature and its input to the Sbus wall module.
Displays and allows modification of centre setpoint.
Displays effective setpoint and its input to the Sbus wall module.
Displays controller time in HH:MM format.
Allows modification of time in hours.
Allows modification of time in minutes.
Allows modification of date in years.
To Next Page