Honeywell CUL6438SR-CV1 - Cnfg Out (Output Configuration); HTG STG3 Output Config; FAN OUT Output Config

STRYKER CVAHU ZIO CONFIGURATION GUIDE
49
Figure 88: Parameter Cnfg Out HtgStg3
HTG STG3: Displays and allows modification of
logical output configuration /terminal assignment for
Heating stage 3 Command. This can be changed as
AO 1, AO 2, DOC1, DOA1, DOA2, DOA3, DOB1,
DOB2, DOB3, DOB4, AO 3, and UNDEFINED.
Default Parameter setting: UNDEFINED
Configuration settings in program are as follows:
0 = AO 1
1 = AO 2
2 = DOC1 (DO1)
3 = DOA1 (DO2)
4 = DOA2 (DO3)
5 = DOA3 (DO4)
6 = DOB1 (DO5)
7 = DOB2 (DO6)
8 = DOB3 (DO7)
9 = DOB4 (DO8)
10 = AO 3
255 = UNDEFINED
Figure 89: Parameter Cnfg Out Fan Out
FAN OUT: Displays and allows modification of logical
output configuration /terminal assignment for Fan
Start-Stop Command. This can be changed as AO 1,
AO 2, DOC1, DOA1, DOA2, DOA3, DOB1, DOB2,
DOB3, DOB4, AO 3, and UNDEFINED.
Default Parameter setting: UNDEFINED
Configuration settings in program are as follows:
0 = AO 1
1 = AO 2
2 = DOC1 (DO1)
3 = DOA1 (DO2)
4 = DOA2 (DO3)
5 = DOA3 (DO4)
6 = DOB1 (DO5)
7 = DOB2 (DO6)
8 = DOB3 (DO7)
9 = DOB4 (DO8)
10 = AO 3
255 = UNDEFINED