Honeywell CUL6438SR-CV1 - Tenant Mode Fan Settings; AUTO Fan Mode; ON Fan Mode; OFF Fan Mode

STRYKER CVAHU ZIO CONFIGURATION GUIDE
55
Fan
The tenant uses Fan to adjust the fan settings
depending on the fan options. It has three possible
positions (2, 3, or 5 position) configured.
Click the FAN soft key to change the fan icon to the
following three positions as shown in Figure 101:
1. AUTO
Figure 101: Tenant mode Fan Auto
Description: Fan has three modes of operation:-
 AUTO: Operates in Auto mode.Refer Figure 101.
 ON: Operates in manual ON mode. Refer Figure
102.
 OFF: Operates in manual OFF mode. Refer
Figure 103.
2. ON
Figure 102: Tenant mode Fan On
3. OFF
Figure 103: Tenant mode Fan Off
 Click the FAN softkey to toggle the fan icon
between ON and AUTO. If the fan is at 2
positions then each click on the FAN soft key,
changes the fan icon display between: ON and
AUTO.
 At position number 5, Fan icon display changes
to one of the following two options:
o OFF
o AUTO.
 And Fan speed indicator is in one of the following
states:
o Low
o Medium
o High