Honeywell CUL6438SR-CV1 - Cnfg Out (Output Configuration); DAMPER Output Config; Time Display; Current Time Display

STRYKER CVAHU ZIO CONFIGURATION GUIDE
50
Figure 90: Parameter Cnfg Out Damper
DAMPER: Displays and allows modification of logical
output configuration /terminal assignment for Damper
control signal. This can be changed as AO 1, AO 2,
AO 3, and UNDEFINED.
Default Parameter setting: UNDEFINED
Configuration settings in program are as follows:
0 = AO 1
1 = AO 2
10 = AO 3
255 = UNDEFINED
Time
(CVAHU controller time display)
Figure 91: Parameter Time Time
TIME: Displays current time in HH MM format.