Honeywell CUL6438SR-CV1 - Status Parameters; HTG OUT Status; CLG OUT Status; DAMPER Status

STRYKER CVAHU ZIO CONFIGURATION GUIDE
22
Status
(CVAHU parameter status display)
Figure 17: Parameter Status Htg Out
HTG OUT: Displays cooling output signal.
Figure 18: Parameter Status Clg Out
CLG OUT: Displays heating output signal.
Figure 19: Parameter Status Damper
DAMPER: Displays damper (%) output signal.
Figure 20: Parameter Status Dmd Limit
DMD LIMIT: Displays demand limit setpoint shift
status as ON or OFF
Configuration settings in program are as follows:
0 = OFF, 1 = ON, 255 = OFF