Honeywell CUL6438SR-CV1 - Alarms Parameters; INVLD SP Alarm; SPC TEMP Alarm

STRYKER CVAHU ZIO CONFIGURATION GUIDE
30
Figure 42: Parameter Alarms Invld Sp
INVLD SP: Displays invalid setpoint override status
as TRUE, FALS or UNDEFINED.
Configuration settings in program are as follows:
0 = FALS, 1 = TRUE, 255 = UNDEFINED
Figure 43: Parameter Alarms Spc Temp
SPC TEMP: Displays space temperature override
status as TRUE, FALS or UNDEFINED.
Configuration settings in program are as follows:
0 = FALS, 1 = TRUE, 255 = UNDEFINED