Honeywell CUL6438SR-CV1 - Cnfg Out (Output Configuration); CLG STG1 Output Config; CLG STG2 Output Config

STRYKER CVAHU ZIO CONFIGURATION GUIDE
46
Cnfg Out
(Configuration of CVAHU analog and digital outputs)
Figure 82: Parameter Cnfg Out Clg Stg1
CLG STG1: Displays and allows modification of
logical output configuration /terminal assignment for
Cooling or Heat Pump stage 1 command. This can be
changed as AO 1, AO 2, DOC1, DOA1, DOA2,
DOA3, DOB1, DOB2, DOB3, DOB4, AO 3, and
UNDEFINED.
Default Parameter setting: UNDEFINED
Configuration settings in program are as follows:
0 = AO 1
1 = AO 2
2 = DOC1 (DO1)
3 = DOA1 (DO2)
4 = DOA2 (DO3)
5 = DOA3 (DO4)
6 = DOB1 (DO5)
7 = DOB2 (DO6)
8 = DOB3 (DO7)
9 = DOB4 (DO8)
10 = AO 3
255 = UNDEFINED
Figure 83: Parameter Cnfg Out Clg Stg2
CLG STG2: Displays and allows modification of
logical output configuration /terminal assignment for
Cooling or Heat Pump stage 2 Command. This can
be changed as AO 1, AO 2, DOC1, DOA1, DOA2,
DOA3, DOB1, DOB2, DOB3, DOB4, AO 3, and
UNDEFINED.
Default Parameter setting: UNDEFINED
Configuration settings in program are as follows:
0 = AO 1
1 = AO 2
2 = DOC1 (DO1)
3 = DOA1 (DO2)
4 = DOA2 (DO3)
5 = DOA3 (DO4)
6 = DOB1 (DO5)
7 = DOB2 (DO6)
8 = DOB3 (DO7)
9 = DOB4 (DO8)
10 = AO 3
255 = UNDEFINED