Honeywell CUL6438SR-CV1 - Tenant Mode Outdoor Air Temp; OAT Display; Tenant Mode Center Setpoint; CNTR SP Display

STRYKER CVAHU ZIO CONFIGURATION GUIDE
58
Figure 108: Tenant mode Oat
OAT: Displays outside air temperature and is an input
to the Sbus wall model function block.
Figure 109: Tenant mode Eff Sp
EFF SP: Displays effective setpoint and is an input to
the Sbus wall model function block.
Figure 110: Tenant mode Cntr Sp
CNTR SP: Displays and allows modification of centre
setpoint. It is both an input and output to the Sbus
wall model function block.
Figure 111: Tenant mode Time
TIME: Displays controller time in HH:MM format.