Honeywell C300 - Configure CEEC300 Block

R500
April 2017
Series 8 C300 Controller User's Guide
Honeywell
53
4. C300 Controller Configuration
4.3. Configure CEEC300 block
4.3 Configure CEEC300 block
A CEE block is created automatically when a C300 Controller function block is added to
the Project tab.
Prerequisites
 Control Builder is running
 Tree windows are open
Considerations
All illustrations used in the procedure are for example purposes only.
To configure a CEEC300 function block, perform the following steps.
Step
Action
Result
1
In the Project window, right-click on
the CEEC300_BLK block icon.
The shortcut menu appears.
2
Click Module Properties...
The CEEC300 Block configuration form
appears. The Tag name field is highlighted.