Honeywell C300 - Display Communications Tab

5. C300 Configuration Form Reference
5.3. CEEC300 Function Block
134
Series 8 C300 Controller User's Guide
Honeywell
R500
April 2017
Plain Text
Parameter Name
User
Configurable
Notes
Exchange
Connection Status
EICONNSTS
No
The status of the
connection between the
initiating controller and
the target controller or
programmable logic
controller (PLC).
Exchange
Connection Error
Code
EICONNERRCODE
No
Shows the error code of
the connection between
the controller and the
target controller or PLC.
Exchange
Connection Error
Description
EICONNERRINFO
No
Shows the extended
error information of the
connection between the
controller and the target
controller or PLC.
Display Communications tab
The Display Communications tab contains information about display connections to the
C300 (that is, Control Builder, Station, and so on). The following table summarizes the
parameter data you can monitor on the Display Communications tab of the
configuration form for the selected CEEC300 block.
Plain Text
Parameter Name
User
Configurable
Notes
Responder Connections
Average Get Rate
CDISPAVGPPSCONN [
]
No
Shows the average
number of display peer
parameters/sec
processed by the CEE.
Maximum Get Rate
CDISPMAXPPSCONN [
]
No
Shows the maximum
number of display peer
parameters/sec
processed by the CEE.
Average Store Rate
CDISPAVGSPSCONN [
]
No
Shows the average
number of display
acyclic stores/sec
processed by the CEE.