Honeywell C300 - Server Displays Tab

5. C300 Configuration Form Reference
5.1. C300 Controller Block
114
Series 8 C300 Controller User's Guide
Honeywell
R500
April 2017
Plain Text
Parameter Name
User
Configurable
Notes
configured gating
parameter.
Create New or Edit
Existing Server
Scripts (Button)
N/A
Launches the Server
scripting configuration
utility.
Server Displays tab
The Server Displays tab is common to all configuration forms for tagged blocks in
Control Builder. The following table summarizes the parameter data you can monitor and
configure on this tab of the configuration form for the selected C300 block.
ATTENTION
The configuration settings you make for Server Load Options on the System
Preferences dialog box determines if the data entered on the Server
Displays tab is loaded to the Experion LX Server. Refer to the Control
Building User’s Guide for information about setting system preferences.
Plain Text
Parameter Name
User
Configurable
Notes
Point Detail Display
SCANPNTDTL
Yes
By default, a Display
template is already entered
into Point Detail Display
box (for example,
sysDtlFTEB.dsp). This
template can be used for
creating your own display
or it can be used as is,
provided that your function
block name matches name
built into detail display that
is supplied as a template.
Group Detail Display
SCANGRPDTL
Yes
By default, a Display
template is already entered
into the Group Detail
Display box (for example,
sysGrpFTEB.dsp). This
template can be used for
creating your own display