TM
MODEL 30 CONTROLLER - INSTALLATION AND OPERATIONS GUIDE
29 31-00206 - 02
Configuring Platform and Station
When you configured CIPer Model 30 controller with WEBStation for the first time, you need to
configure the platform and station with default credentials.
After your first login, the controller requests you to change your default credentials.
Configure platform
1. Start the Niagara N4.x workbench.
2. Connect to the CIPer
Model 30 programming tool platform with default platform credentials and
the default IP address, and click OK.
3. Verify the certificate details displayed during the connection establishment and click Accept.
This action display Authentication Window.
4. Enter default platform credentials in the Authentication window and click OK. This action
display Change Platform Defaults Wizard.
If you frequently logging to the platform, select Remember these credentials option.
To Next Page
Loading...
