Honeywell CIU 888 - Page 11

CIU 888 Configuration System overview
Part No.: 4417593_Rev09 Ensite Pro to CIU 888 Migration Manual
CIU 888 1 - 3
$*6
1. Click (Start) > All Programs > Enraf > Configuration >
Ensite Pro.
Ensite Pro is launched. The Ensite Pro splash screen is displayed
(see FIGURE 1-4) followed by the Ensite Pro login window (see
FIGURE 1-5).
FIGURE 1-4 Ensite Pro splash screen
FIGURE 1-5 Ensite Pro login window
2. Enter the username and password to log in to Ensite Pro. Next, click
OK.
After entering a valid username and password the Ensite Pro tool bar
is displayed (see FIGURE 1-6).
FIGURE 1-6 Ensite Pro tool bar - Select Site button active