Honeywell CIU 888 - Chapter 3 Getting Started

Commissioning of a Standalone System Setup
Part No.: 4417593_Rev09 Ensite Pro to CIU 888 Migration Manual
CIU 888 2 - 5
$*6
Procedure:
1. In the CIU 888 Web interface, click CONFIGURE in the section
menu bar.
The Configure window is displayed (see FIGURE 2-5).
FIGURE 2-5 CIU 888 Web interface: Configure window
2. If a license is installed on the CIU 888, ‘LICENSE_OK’ is displayed in
the License status field. If no license is installed, the field is empty. In
this case, contact Honeywell Enraf.