11 - 3
Parts and Functions
Front Panel
Terminal Well
Place the terminal in this well to communicate with a host device, power the terminal, and
charge the installed battery pack. The base completely charges the main battery in a Dolphin
terminal in 4 hours for the standard battery or 6 hours for the extended battery. If the host
device is a workstation that uses ActiveSync or Windows Device Mobile, and the
synchronization begins immediately.
Auxiliary Battery Well
See Auxiliary Battery Well on page 11-4.
AUX Battery LED
Indicates status of the battery charging in the auxiliary battery well; see Back Panel on page
11-4.
For information about charging a battery in the auxiliary battery well, see page 11-6.
Dock LED
Indicates if a terminal is docked properly in the base.
This color means…
Orange The auxiliary battery is charging.
Green The auxiliary battery has completed charging and is ready for use.
This color means…
2
Dock LED
Auxiliary Battery Well
AUX Battery LED
COMM LED
Terminal Well
Blue The terminal is properly seated in the base.
To Next Page
Loading...
