11 - 4
COMM LED
This is the communication LED. It indicates the status of data transfer between the Dolphin
terminal and the host device.
Back Panel
Auxiliary Battery Well
The base enables you to charge an additional battery pack independently of the terminal well
in 4 hours for the standard battery or 6 hours for the extended battery. This feature ensures
that you can always have a fully-charged battery for your terminal. See Charging a Spare
Battery in the Auxiliary Battery Well on page 11-6.
USB Port
This USB port is USB v2.0 Hi-Speed (480 Mbps) compliant. Using a USB cable, you can
connect the base to a host device, such as a workstation. USB communication occurs through
Microsoft ActiveSync (v4.5 or higher) or Microsoft Windows Mobile Device Center (WMDC)
depending on the host workstation’s operating system. When the terminal is seated in the
terminal well, it is connected to the host device via the base.
Note: ActiveSync on your Dolphin terminal works with Windows Mobile Device Center on host
workstations running Windows Vista or Windo
ws 7 and with ActiveSync on host workstations
running Windows XP. For detailed information on ActiveSync and WMDC visit
the Microsoft Windows Phone Web site (http://go.microsoft.com/fwlink/?LinkId=147001).
DC Power Jack
See Power on page 11-5.
This color means…
Green A USB Connection is established with the host workstation.
Auxiliary Battery Well
DC Power Jack
USB Port
To Next Page
Loading...
