2 - 15
Replacing the Battery in Terminals Equipped with a Battery Door Lock
The following instructions are relevant for Dolphin 70e Black terminals equipped with a battery door lock.
If your Dolphin 70e Black terminal does not have a battery door lock, refer to the instructions
on page 2-16.
Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet
components may cause damage not covered by the warranty.
Note: The following illustrations depict a standard battery with a standard battery door; however, battery removal/
installation procedures are the same for the extended battery and battery door.
1. Press the Power button to place the terminal in Suspend mode.
2. Unlock and remove the battery door.
3. Pull the battery latch back and remove the battery.
4. Insert the new battery, install the battery door and engage the door lock. See battery part number
specifications on page 2-14.
To Next Page
Loading...
