6 - 25
Proximity Sensor Settings
The integrated proximity sensor detects when an object is in close proximity to the entire touch panel
display (e.g., a person's face, carrying holster, or tabletop). By default, the proximity sensor automatically
turns the display and touch panel off when you hold the terminal near your ear during a phone call. The
display and touch panel turn back on when the sensor detects the removal of the object.
To enable this feature at all times, not just during phone calls, check the Enable Proximity Sensor box.
Accelerometer Calibration
Touch Start to calibrate the integrated accelerometer sensor used for motion detection. When calibration
is complete, the “Accelerometer Calibration Finished!” message window appears.
To Next Page
Loading...
