2 - 3
Installing the Battery in Terminals without a Battery Door Lock
The terminal is shipped with the battery packaged separate from the unit. Perform the steps illustrated
below to install the battery.
Note: If your Dolphin 70e Black model does not have a battery retention strap, refer to the battery installation
instructions on page 2-2.
Ensure all components are dry prior to placing the battery in the terminal. Mating wet components may cause
damage not covered by the warranty.
For information on how to remove the battery, see Replacing the Battery on page 2-14.
2
1
3
4
5
7
6
98
Battery
Retention
Strap
Note: Standard battery and standard battery door shown.
To Next Page
Loading...
