12 - 4
COMM LED
Indicates the status of the connection and data transfer between the Dolphin terminal and the
host device.
Note: Ethernet activity is indicated by RJ45 integrated LED on the back panel of the base.
Back Panel
Auxiliary Battery Well
The eBase enables you to charge an additional battery pack independently of the terminal well
in 4 hours for the standard battery or 6 hours for the extended battery. This feature ensures
that you can always have a fully charged battery for your terminal.
USB Port
This USB port is USB v2.0 Hi-Speed (480 Mbps) compliant. Using a USB cable, you can
connect the eBase to a USB compliant device to facilitate communication to and from the
terminal. USB communication occurs through Microsoft ActiveSync (v4.5 or higher) or
Microsoft Windows Mobile Device Center depending on the host workstation’s operating
system. When the terminal is seated in the terminal well, it is connected to the peripheral
device via the eBase.
Note: ActiveSync on your Dolphin terminal works with Windows Mobile Device Center on host
workstations running Windows Vista or Windows 7 and with ActiveSync on host workstations
running Windows XP. For detailed information on ActiveSync and Windows Mobile Device
Center visit the Microsoft Windows Phone Web site
(http://go.microsoft.com/fwlink/?LinkId=147001).
This color means…
Green A USB Connection is established with the host workstation.
Auxiliary Battery Well
DC Power Jack
RJ45 Ethernet Port
USB Port
Ye l l o w L E D
Green LED
To Next Page
Loading...
