9 - 15
5. Tap the Apply button. The Connection Manager automatically switches to the Status Tab.
6. Tap the Radio Power ON button.
7. When the radio connects to the network, the status changes to “Registered” and a Signal Strength is
displayed.
8. If Auto Start Data Session was checked on the Setup tab, the state automatically changes from
“Registered” to “Data Session Open” and an IP address appears. If Auto Start Data Session was
not selected, then the Data session can be started manually by tapping Start Data Session button
from the Status tab.
Dial-up PPP Method
1. Tap > Settings > Connection > Connections .
2. Under My ISP, tap Add a new modem connection.
3. Enter a name for the connection. Select SW Gobi ATPPP Modem. Tap Next.
To Next Page
Loading...
