Honeywell Galaxy Flex - Page 120

Communications [56] Galaxy Flex Installer Manual
120
Int Telecoms [56.1]

 01 = Format
 
  1 = DTMF
  
   1 = Channels 1-16
   
    1 = Output Function
   
    2 = Output Mode
    
     1 = Latch
    
     2 = Reflex
    
     3 = Pulse
   
    3 = Output Polarity
   
    4 = Diag Recording (not available)
   
    5 = Descriptor (not available)
   
    6 = Control (not available)
   
    7 = Output Groups
  
   2 = Acct/Channel
 
  2 = SIA 0 - (0-4)
  
   1 = Trigger Events
   
    1 = Status
   
    2 = Groups
  
   2 = Group Settings
  
   1 = Telephone No.
  
   2 = Account No.
 
  3 = Microtech
  
   1 = Trigger Events
   
    1 = Status
   
    2 = Groups
  
   2 = Group Settings
  
   1 = Telephone No.
  
   2 = Account No.
 
 
  4 = Contact ID
 
  1 = Trigger Events
  
   1 = Status
  
   2 = Groups
 
  2 = Ack Timeout
  
   1 = 30 seconds
  
   2 = 60 seconds
 
  3 = Group Settings
 
  1 = Telephone No.
 
  2 = Account No.

Continued on next page