Honeywell Galaxy Flex - Page 121

Galaxy Flex Installer Manual Communications [56]
121
Int Telecoms [56.1] (continued)


 02 = Telephone No. 1 – 22 digits maximum

 03 = Account No. - 6 digits maximum

 04 = Receiver
 
  1 = Single
 
  2 = Dual
 
  3 = Alternate

 05 = Telephone No. 2 - 22 digits maximum

 06 = Dial Type
 
  1 = Tone
 
  2 = Pulse

 07 = Autotest
 
  1 = Start Time
 
  2 = Intervals - 0 - 99 hours
 
  3 = Int. Test (0 = Disabled, 1 = Enabled)

 08 = Engineer Test

 09 = No. of Rings - 10 (1-20)

 10 = Line Fail
 
  1 = Line Volts (0 = Disabled, 1 = Enabled)
 
  2 = Dial Tone (0 = Disabled, 1 = Enabled)
 
  3 = Incoming Call (0 = Disabled, 1 = Enabled)

 11 = Fail to Comm
 
  1 = 60
 
  2 = 120
 
  3 = 180
 
  4 = 240
 
  5 = 300

 12 = Remote Access
 
  1 = Access Period
  
   1 = Off
  
   2 = All Unset
  
   3 = Any Set
  
   4 = Any Time
 
  2 = Mode
 
  1 = Direct Access
 
  2 = Manager Authorize
 
  3 = Call Back

 13 = Call Home Not Available



Continued on next page