Galaxy Flex Installer Manual Timers [65]
171
The Flex control panel provides programming of timer schedules on a weekly basis. Each
event corresponds to an ON or an OFF time. The state of the schedule is ON or OFF
depending on the last event that was reached.
Timers can be assigned to:
Individual users to disable them
Individual doors to lock them
Individual groups for autoset
Outputs for automatic activation
Note: The ON period is the secure period for a particular schedule when users will be
unable to gain access to allocated areas when the Autoset and Lockout features for
allocated groups are enabled.
Weekly Schedule [65.1]
A weekly schedule consists of a selection of daily time programs for each day of the week.
The state of the weekly schedule is ON or OFF depending on the last event that was
reached. Up to 4 weekly schedules with 28 time slots are available for programming
depending on panel variant
The weekly schedules are used to control these panel functions:
Auto setting
Lockout times
User access times
Timer Outputs
Name [65.1.1]
A maximum 12 character alpha-numeric name can be entered here for a weekly schedule
Status [65.1.2]
The status of each of the timers is shown here whether 0=OFF or 1=ON. To change the
status press A or B, or press 1 to select ON or 2 to select OFF.
Events [65.1.3]
This option programs the weekly timer events with Day (Mon-Sun) and ON/OFF times.
Note: The number of weekly timer events is dependent on panel variant.
Programming Timer Events
1. Select the Events option. The programmed status (if any) of the first timer is displayed.
To Next Page
Loading...
Need help?
General
