Honeywell Galaxy Flex

Codes [42, Quick Menu 7] Galaxy Flex Installer Manual
52
To assign or modify a PIN:
1. Do one of the following:
 Assign a PIN: Type a new PIN number of the correct length.
If you attempt to assign a PIN that already exists, the message DUPLICATE
ENTRY is displayed and the PIN is not assigned to the user.
 Modify a PIN: Press 

 to erase the existing PIN, and then type the new or
modified PIN.
2. When the correct PIN has been entered, press ent.
If a MAX No. has been previously assigned the display will prompt: delete MAX No.
A=YES, B=NO and return to the previous menu level.
Authorized manager access
To delete a PIN:
1. Press 

.
2. Press ent. A hollow box () is displayed on the top line of the screen.
To assign a dual code:
 Press # while the Modify PIN option is selected. The # symbol is displayed at the start
of the assigned user PIN, for example #1314.
When a PIN has been assigned as a dual code two solid boxes (
■■
) are displayed on the top
line of the user number details screen.
Note: You can’t assign the Master manager code as dual.
Dual codes operation
If you enter a single dual code the message NO ACCESS – ADDITIONAL CODE is
displayed. A second dual code must be entered within 60 seconds of the first dual code to
access the menu, and set or unset the system.
Dual codes can be different types. The level of acces granted is determined by the second
code entered.
A single entry of a dual code, without a second dual code entry within 60 seconds, is
recorded in the event log as an Illegal Code; all outputs programmed as Illegal Code are
activated.
Dual Focus
If a MAX number for the same user has a # assigned the dual function only works between
the PIN and the MAX card of the same user.
Dual Access Cards
If a user’s card number is assigned a # the card becomes dual access and requires a second
PIN or card to open the door (see To assign a dual code in Modify PIN [42.1.User code.1]).