9
Vigilon Plus fire alarm system
Indicators Description
Sounder
(amber)
When illuminated it indicates that one or more delay blocks are setup on the panel.
Test
(amber)
When illuminated it indicates one or more zones are in Test mode.
Controls
Description
MENU ON/OFF
Pressing the Menu On/Off will enable/disable the on screen menu facility, which gives access to the system menus.
F1
F4
The ‘Fn’ buttons are used to select a function and sub functions at the panel menus that appear on the display.
Each option in the menus corresponds to one of the function buttons and pressing a button will select the option
which appears above it on the display.
CANCEL
BUZZER
The Cancel Buzzer button when pressed will stop the internal panel buzzer from sounding.
SOUND
ALARMS
Pressing the Sound Alarms button will sound all the system alarms. This button is only pressed in an emergency
or at other agreed times, for example when conducting a sounder test or practice evacuation.
SILENCE
ALARMS
Pressing the Silence Alarms button will silence the system alarms.
RESET
Pressing the Reset button will clear any res and return the panel to its normal condition. If a re condition occurs
immediately after reset then the indicated device should be investigated.
www.acornfiresecurity.com
www.acornfiresecurity.com
To Next Page
Loading...
