Honeywell Granit XP 199 i Series - Page 266

248 Granit XP User Guide
Out-of-Range Delay Out-of-Range Delay (Range 0-
3000) *0
BT_ORY#### 125
Prefix/Suffix Selections
Add CR Suffix to All Symbologies VSUFCR 117
Prefix Add Prefix PREBK2## 117
Clear One Prefix PRECL2 117
Clear All Prefixes PRECA2 117
Suffix Add Suffix SUFBK2## 117
Clear One Suffix SUFCL2 117
Clear All Suffixes SUFCA2 117
Function Code Transmit *Enable RMVFNC0 118
Disable RMVFNC1 118
Intercharacter Delay Range 0 - 5000 (5ms increments) DLYCHR#### 118
User Specified
Intercharacter Delay
Delay Length
0 - 5000 (5ms increments)
DLYCRX#### 119
Character to Trigger Delay DLY_XX## 119
Interfunction Delay Range 0 - 5000 (5ms increments) DLYFNC#### 119
Intermessage Delay Range 0 - 5000 (5ms increments) DLYMSG#### 120
Data Formatter Selections
Data Format Editor *Default Data Format (None) DFMDF3 122
Show Data Format Settings DFMBK3? 122
Enter Data Format DFMBK3## 123
Clear One Data Format DFMCL3 123
Clear All Data Formats DFMCA3 123
Data Formatter Data Formatter Off DFM_EN0 137
*Data Formatter On,
Not Required,
Keep Prefix/Suffix
DFM_EN1 138
Data Format Required,
Keep Prefix/Suffix
DFM_EN2 138
Data Formatter On,
Not Required,
Drop Prefix/Suffix
DFM_EN3 138
Data Format Required,
Drop Prefix/Suffix
DFM_EN4 138
Data Format Non-Match Error
Tone
*Data Format Non-Match Error
Tone On
DFMDEC0 138
Data Format Non-Match Error
Tone Off
DFMDEC1 139
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page