192 Granit XP User Guide
Data Matrix
< Default All Data Matrix Settings >
Data Matrix On/Off
Direct Part Marking Decoding
If you are having trouble reading Direct Part Marking (DPM) barcodes, scan Dot-
peen DPM Decoding for Dotpeen codes or scan Reflective (Etched) DPM Decod-
ing for reflective (etched) codes
. Default = Disable DPM Decoding.
* Uses Digimarc Decoder then
Both Decoders
Uses ID Decoder then
Alternates Decoders
Uses Digimarc Decoder then
Alternates Decoders
To Next Page
Loading...
