Honeywell Granit XP 1990iXR - Chapter 4 - Input;Output Settings; Power up Beeper

CHAPTER
4
Granit XP User Guide 79
INPUT/OUTPUT SETTINGS
Power Up Beeper
The scanner can be programmed to beep when it’s powered up. If you are using a
cordless system, the base can also be programmed to beep when it is powered up.
Scan the Off barcode(s) if you don’t want a power up beep. Default = Power Up
Beeper On - Scanner.
Power Up Beeper Off -
Scanner
* Power Up Beeper On -
Scanner
Power Up Beeper Off -
Cordless Base
Power Up Beeper On -
Cordless Base