Granit XP User Guide 71
Virtual Keyboard
Once your scanner has been connected directly to an iPad, smart phone, or laptop,
you can toggle the virtual keyboard on your device with a quick double pull of the
scanner trigger.
Bluetooth HID Keyboard Disconnect
If your scanner has been connected directly to an iPad, smart phone, or laptop, you
must disconnect it in order to once again communicate with the base or Access
Point. Scan the Bluetooth HID Keyboard Disconnect barcode to unlink the scan-
ner from the currently linked host. Scan the linking barcode on the base or Access
Point to relink the scanner.
Pair with Bluetooth Low Energy (BLE) Devices
Use the following codes to connect to Bluetooth low energy devices. Scan HID BLE
Connect to connect the scanner to Bluetooth Low Energy HID devices. Scan Serial
BLE Connect to establish two-way communication between the scanner and Blue-
tooth Low Energy serial devices.
Bluetooth HID Keyboard Disconnect
To Next Page
Loading...
