Description
HON 380 gas pressure regulator with HON 673/674 controller 10
2.4 Identifying the device
Make sure you have the right manual for your gas pressure regulator.
Use the nameplates to identify the gas pressure regulator.
Make sure that the on-site conditions match the information on the nameplates
and the technical specifications.
Technical specifications
The gas pressure regulator HON 380 type plate locations are as follows:
Figure No. Meaning
1 Front of the body
2 On the side of the regulator unit
3 On the side of the controller
The details on the type plate have the following meaning:
Figure No. Meaning
1 Manufacturer
2 Model name
3 CE - PIN
4 Device version
5 Nominal size
6 PS = Maximum allowable pressure
7 Serial number of the device
8 Year built
9 Temperature range
10 Connection
11 Standard (EN 334)
pressure regulator
Verifying the tech-
nical specifications
sure regulator’s
nameplates
plate of the gas pres-
sure regulator
To Next Page
Loading...
