l
The Device is mounted in limited access areas. Any system repairs must be done only by qualified, safety aware personnel. Do not
disassemble or refit the Device. Do not attempt to personally repair it.
l
Main power must be disconnected before any installation or tuning work starts. The device installation or maintenance must not be
done during stormy conditions.
l
The device must be powered by DC 12-29V power supply.
l
Blown fuses or any other components of the Device must not be replaced by the user.
l
Keep the Device dry. Any liquid, i.e., rain, moisture, may destroy or damage the inside circuitry.
l
Handle carefully. Do not vibrate or shake it violently.
l
Do not clean it with chemicals or detergent.
l
Please read the user manual carefully before installation and operation of the Device. Otherwise, it may not work properly or be
damaged.
1.8 TECHNICAL SUPPORT
For support in the USA contact Honeywell Technical Support at:
l
Phone: For US, Canada, LATAM -1-480-936-7425
l
Email: CLSS.Tech@honeywell.com
l
Website: fire.honeywell.com
l
Address:
Honeywell International Inc.
12 Clintonville Rd.
Northford, CT 06472
(800)-627-3473
1.9 DISCLAIMER
Images in the document are for reference purpose only and are subject to change. All trademarks, service marks, word marks,
design marks, and logos are property of their respective owners.
Honeywell Connected Life Safety Services | Honeywell Connected Life Safety Services
Installation and Operation Manual | REV. B
4
Wednesday, February 28, 2024
To Next Page
Loading...
