Bar Signal Strength Rating
1 1 to 9
2 10 to 15
3 16 to 23
4 24 to 31
Table 5.1 Signal Strength
5.11.1 IMPROVING THE SIGNAL QUALITY
Honeywell recommends that the signal strength rating should be 5 or above for a consistent good connection.
If the signal rating is lower than 5, reposition the antenna, and monitor the signal strength bars in the CLSS App.
If required, contact Honeywell Technical Support.
Honeywell Connected Life Safety Services | Honeywell Connected Life Safety Services
Installation and Operation Manual | REV. B
20
Wednesday, February 28, 2024
To Next Page
Loading...
