SECTION 1: GENERAL INFORMATION
1.1 ABOUT THIS MANUAL
This manual provides a product description and detailed procedures for installation, commissioning, and troubleshooting the CLSS
Pathway communicator.
n
Using This Manual
This manual is written with the understanding that the user is trained in the operations and services required for this product.
Honeywell reserves the right to modify and revise this manual without notice.
n
Usage of Terms
In this manual, terms used for this product name are as follows:
l
The CLSS Pathway may also be referred as the communicator.
l
The Connected Life Safety Services mobile app may also be referred as the CLSS App.
1.2 INFORMATION SOURCES
Honeywell offers suitable information sources based on informational requirements.
1.2.1 TRAINING MODULES
Training modules are available when logged onto:
https:/ / fire.honeywell.com/ #/ help-videos
1.2.2 RELATED DOCUMENTS
The table below lists documents related with the CLSS Pathway:
Purpose Refer to...
Install and wire the CLSS Pathway inside
the enclosure
CLSS Pathway - Product Installation
Document
P/N: LS10338-000HW-E
Quickly install and configure for the
central station communication
CLSS Pathway - Quick Start Guide
P/N: LS10339-000HW-E
Use various installation and
configuration options
CLSS Pathway - Installation and
Operation Manual (This document)
P/N: LS10340-000HW-E
Table 1.1 Related Documents
1.3 DOCUMENTATION FEEDBACK
Your feedback helps us keep our documentation up-to-date and accurate. If you have any comments or suggestions about our
Online Help or printed documents, you can email us.
Please include the following information:
Honeywell Connected Life Safety Services | Honeywell Connected Life Safety Services
Installation and Operation Manual | REV. B
1
Wednesday, February 28, 2024
To Next Page
Loading...
